In short
Automechanika visitors are workshop owners, distributors and parts buyers, so stands show parts and tools in use (on a vehicle, lift or workbench), make part ranges easy to scan and give distributors a table to talk programmes and logistics. Start a custom stand about 6–9 months ahead and confirm dates, height limits and rules in the exhibitor manual.
Key points
- Where and when: Frankfurt, every two years, in September (even years).
- The audience is mostly workshop owners.
- Live workshop demonstrations on a lift or bench.
- Range walls organised by vehicle system.
- Plan a custom stand about 6–9 months before the show.
Automechanika Frankfurt for exhibitors
Automechanika Frankfurt covers parts, components, diagnostics, workshop equipment, tyres and car care. Live workshop demonstrations and product ranges are central.
| Automechanika Frankfurt | |
|---|---|
| City | Frankfurt |
| Venue | Messe Frankfurt |
| Sector | Automotive aftermarket and service |
| Cycle | Every two years, in September (even years) |
| Main stand activity | Product display and orders |
| Custom stand lead time | 6–9 months |
Who you are designing for
Workshop owners, parts distributors, fleet operators and OEM aftermarket buyers.
What matters most on a Automechanika Frankfurt stand:
- Live workshop demonstrations on a lift or bench.
- Range walls organised by vehicle system.
- Distributor meeting tables.
- Diagnostic and software demos on screens.
Layouts for product display and orders, by stand type
Most Automechanika Frankfurt exhibitors build around product display and orders. How that works depends on how many sides of your plot are open. If you are unsure which type you have, see exhibition stand types.
| Stand type | Open sides | What works |
|---|---|---|
| Row (inline) | 1 | A shop-like display wall with a counter for orders, leaving the floor clear to browse. |
| Corner | 2 | Displays along both aisles with an order desk in the closed corner. |
| Peninsula | 3 | A room set or gallery display at the front with buyer tables behind it. |
| Island | 4 | A gallery route around a central feature, with order desks and buyer seating along one side. |
Stand ideas for Automechanika Frankfurt
- A vehicle on a lift with parts fitted and visible.
- A diagnostics demo running on a workshop screen.
- A range wall organised by vehicle system.
Planning, approvals and logistics
Vehicles and lifts need specific approvals and floor loads; check the manual.
Allow about 6–9 months for a custom stand. The exhibitor manual sets height limits, open-side rules and service deadlines; see venue approval and technical drawings.
Mistakes we see at Automechanika Frankfurt
- Static parts walls with no demonstration.
- Graphics that do not say which vehicles parts fit.
Try your Automechanika Frankfurt layout in 3D
ExhibitionBase Studio turns your plot size, open sides and a brief about product display and orders into an editable 3D stand for 5 credits, renders it and exports a plan for your builder. New workspaces get 5 free credits.
Frequently asked questions
01How often is Automechanika Frankfurt held?
Every two years, in September of even-numbered years. Confirm dates on the official site.
02Can I bring a vehicle onto the stand?
Usually yes with conditions on fuel, batteries and move-in. Check the exhibitor manual.
03How early should I start designing a Automechanika Frankfurt stand?
For a custom stand, about 6–9 months ahead: long enough for design, organiser approval, production and shipping. Shell scheme stands can be planned in weeks.
04Can I reuse my Automechanika Frankfurt stand at other shows?
Often, if it is modular. Design the core (walls, counters, product display and orders area) to work on several plot sizes, and swap graphics per show. See [modular vs custom stands](/guides/modular-vs-custom-exhibition-stands).
Put it into practice
From a client brief to a 3D stand concept in minutes
An editable 3D exhibition stand concept from a written brief and the brand's website, at your exact size.
Guidance here reflects common practice. Venues, organisers and countries set their own rules: always check the exhibitor manual and work with a qualified stand builder and engineer for structures.
